An Atomically Resolved Schottky Barrier Height Approach for Bridging the Gap between Theory and Experiment at Metal-Semiconductor Heterojunctions.

We propose an atomically resolved approach to capture the spatial variations of the Schottky barrier height (SBH) at metal-semiconductor heterojunctions. This proposed scheme, based on atom-specific partial density of states (PDOS) calculations, further enables calculation of the effective SBH that aligns with conductance measurements. We apply this approach to study the variations of SBH at MoS2@Au heterojunctions, in which MoS2 contains conducting and semiconducting grain boundaries (GBs). Our results reveal that there are significant variations in SBH at atoms in the defected heterojunctions. Of particular interest is the fact that the SBH in some areas with extended defects approaches zero, indicating Ohmic contact. One important implication of this finding is that the effective SBH should be intrinsically dependent on the defect density and character. Remarkably, the obtained effective SBH values demonstrate good agreement with existing experimental measurements. Thus, the present study addresses two long-standing challenges associated with SBH in MoS2-metal heterojunctions: the wide variation in experimentally measured SBH values at MoS2@metal heterojunctions and the large discrepancy between density-functional-theory-predicted and experimentally measured SBH values. Our proposed approach points out a valuable pathway for understanding and manipulating SBHs at metal-semiconductor heterojunctions.

Electrochemical Knocking-Down of Zn Metal Clusters into Single Atoms.

Single Atoms Catalysts (SACs) have emerged as a class of highly promising heterogeneous catalysts, where the traditional bottom-up synthesis approaches often encounter considerable challenges in relation to aggregation issues and poor stability. Consequently, achieving densely dispersed atomic species in a reliable and efficient manner remains a key focus in the field. Herein, we report a new facile electrochemical knock-down strategy for the formation of SACs, whereby the metal Zn clusters are transformed into single atoms. While a defect-rich substrate plays a pivotal role in capturing and stabilizing isolated Zn atoms, the feasibility of this novel strategy is demonstrated through a comprehensive investigation, combining experimental and theoretical studies. Furthermore, when studied in exploring for potential applications, the material prepared shows a remarkable improvement of 58.21% for the Li+ storage and delivers a capacity over 300 Wh kg-1 after 500 cycles upon the transformation of Zn clusters into single atoms.

Outcome and Risk of Poststroke Pneumonia in Patients with Acute Ischemic Stroke After Endovascular Thrombectomy: A Post Hoc Analysis of the DIRECT-MT Trial.

BACKGROUND: In this study, we aimed to investigate the risk factors and impact of poststroke pneumonia (PSP) on mortality and functional outcome in patients with acute ischemic stroke (AIS) after endovascular thrombectomy (EVT). METHODS: This was a post hoc analysis of a prospective randomized trial (Direct intraarterial thrombectomy in order to revascularize AIS patients with large-vessel occlusion efficiently in Chinese tertiary hospitals: a multicenter randomized clinical trial). Patients with AIS who completed EVT were evaluated for the occurrence of PSP during the hospitalization period and their modified Rankin Scale (mRS) scores at 90 days after AIS. Logistic regression analysis was conducted to investigate the independent predictors of PSP. Propensity score matching was conducted for the PSP and non-PSP groups by using the covariates resulting from the logistic regression analysis. The associations between PSP and outcomes were analyzed. The outcomes included 90-day poor functional outcome (mRS scores > 2), 90-day mortality, and early 2-week mortality. RESULTS: A total of 639 patients were enrolled, of whom 29.58% (189) developed PSP. Logistic regression analysis revealed that history of chronic heart failure (unadjusted odds ratio [OR] 2.011, 95% confidence interval [CI] 1.026-3.941; P = 0.042), prethrombectomy reperfusion on initial digital subtraction angiography (OR 0.394, 95% CI 0.161-0.964; P = 0.041), creatinine levels at admission (OR 1.008, 95% CI 1.000-1.016; P = 0.049), and National Institutes of Health Stroke Scale at 24 h (OR 1.023, 95% CI 1.007-1.039; P = 0.004) were independent risk factors for PSP. With propensity scoring matching, poor functional outcome (mRS > 2) was more common in patients with PSP than in patients without PSP (81.03% vs. 71.83%, P = 0.043) at 90 days after EVT. The early 2-week mortality of patients with PSP was lower (5.74% vs. 12.07%, P = 0.038). But there was no statistically significant difference in 90-day mortality between the PSP group and non-PSP group (22.41% vs. 14.94%, P = 0.074). The survivorship curve also shows no statistical significance (P = 0.088) between the two groups. CONCLUSIONS: Nearly one third of patients with AIS and EVT developed PSP. Heart failure, higher creatinine levels, prethrombectomy reperfusion, and National Institutes of Health Stroke Scale at 24 h were associated with PSP in these patients. PSP was associated with poor 90-day functional outcomes in patients with AIS treated with EVT.

Ultrathin LayCoOx Nanosheets with High Porosity Featuring Boosted Catalytic Oxidation of Benzene: Mechanism Elucidation via an Experiment-Theory Combined Paradigm.

Designing transition-metal oxides for catalytically removing the highly toxic benzene holds significance in addressing indoor/outdoor environmental pollution issues. Herein, we successfully synthesized ultrathin LayCoOx nanosheets (thickness of ∼1.8 nm) with high porosity, using a straightforward coprecipitation method. Comprehensive characterization techniques were employed to analyze the synthesized LayCoOx catalysts, revealing their low crystallinity, high surface area, and abundant porosity. Catalytic benzene oxidation tests demonstrated that the La0.029CoOx-300 nanosheet exhibited the most optimal performance. This catalyst enabled complete benzene degradation at a relatively low temperature of 220 °C, even under a high space velocity (SV) of 20,000 h-1, and displayed remarkable durability throughout various catalytic assessments, including SV variations, exposure to water vapor, recycling, and long time-on-stream tests. Characterization analyses confirmed the enhanced interactions between Co and doped La, the presence of abundant adsorbed oxygen, and the extensive exposure of Co3+ species in La0.029CoOx-300 nanosheets. Theoretical calculations further revealed that La doping was beneficial for the formation of oxygen vacancies and the adsorption of more hydroxyl groups. These features strongly promoted the adsorption and activation of oxygen, thereby accelerating the benzene oxidation processes. This work underscores the advantages of doping rare-earth elements into transition-metal oxides as a cost-effective yet efficient strategy for purifying industrial exhausts.

Recent Advances in In-Memory Computing: Exploring Memristor and Memtransistor Arrays with 2D Materials.

The conventional computing architecture faces substantial challenges, including high latency and energy consumption between memory and processing units. In response, in-memory computing has emerged as a promising alternative architecture, enabling computing operations within memory arrays to overcome these limitations. Memristive devices have gained significant attention as key components for in-memory computing due to their high-density arrays, rapid response times, and ability to emulate biological synapses. Among these devices, two-dimensional (2D) material-based memristor and memtransistor arrays have emerged as particularly promising candidates for next-generation in-memory computing, thanks to their exceptional performance driven by the unique properties of 2D materials, such as layered structures, mechanical flexibility, and the capability to form heterojunctions. This review delves into the state-of-the-art research on 2D material-based memristive arrays, encompassing critical aspects such as material selection, device performance metrics, array structures, and potential applications. Furthermore, it provides a comprehensive overview of the current challenges and limitations associated with these arrays, along with potential solutions. The primary objective of this review is to serve as a significant milestone in realizing next-generation in-memory computing utilizing 2D materials and bridge the gap from single-device characterization to array-level and system-level implementations of neuromorphic computing, leveraging the potential of 2D material-based memristive devices.

Laser-Ironing Induced Capping Layer on Co-ZIF-L Promoting In Situ Surface Modification to High-Spin Oxide-Carbon Hybrids on the "Real Catalyst" for High OER Activity and Stability.

Enhancing electrocatalytic performance through structural and compositional engineering attracts considerable attention. However, most materials only function as pre-catalysts and convert into "real catalysts" during electrochemical reactions. Such transition involves dramatic structural and compositional changes and disrupts their designed properties. Herein, for the first time, a laser-ironing (LI) approach capable of in-situ forming a laser-ironing capping layer (LICL) on the Co-ZIF-L flakes is developed. During the oxygen evolution reaction (OER) process, the LICL sustains the leaf-like morphology and promotes the formation of OER-active Co3 O4 nanoclusters with the highest activity and stability. In contrast, the pristine and conventional heat-treated Co-ZIF-Ls both collapse and transform to less active CoOOH. The density functional theory (DFT) calculations pinpoint the importance of the high spin (HS) states of Co ions and the narrowed band gap in Co3 O4 nanoclusters. They enhance the OER activity by promoting spin-selected electron transport, effectively lowering the energy barrier and realizing a spontaneous O2 -releasing step that is the potential determining step (pds) in CoOOH. This study presents an innovative approach for modulating both structural and compositional evolutions of electrocatalysts during the reaction, sustaining stability with high performance during dynamic electrochemical reactions, and providing new pathways for facile and high-precision surface microstructure control.

2D/2D Heterojunction of BiOBr/BiOI Nanosheets for In Situ H2 O2 Production and Activation toward Efficient Photocatalytic Wastewater Treatment.

The presence of toxic organic pollutants in aquatic environments poses significant threats to human health and global ecosystems. Photocatalysis that enables in situ production and activation of H2 O2 presents a promising approach for pollutant removal; however, the processes of H2 O2 production and activation potentially compete for active sites and charge carriers on the photocatalyst surface, leading to limited catalytic performance. Herein, a hierarchical 2D/2D heterojunction nanosphere composed of ultrathin BiOBr and BiOI nanosheets (BiOBr/BiOI) is developed by a one-pot microwave-assisted synthesis to achieve in situ H2 O2 production and activation for efficient photocatalytic wastewater treatment. Various experimental and characterization results reveal that the BiOBr/BiOI heterojunction facilitates efficient electron transfer from BiOBr to BiOI, enabling the one-step two-electron O2 reduction for H2 O2 production. Moreover, the ultrathin BiOI provides abundant active sites for H2 O2 adsorption, promoting in situ H2 O2 activation for •O2 - generation. As a result, the BiOBr/BiOI hybrid exhibits excellent activity for pollutant degradation with an apparent rate constant of 0.141 min-1 , which is 3.8 and 47.3 times that of pristine BiOBr and BiOI, respectively. This work expands the range of the materials suitable for in situ H2 O2 production and activation, paving the way toward sustainable environmental remediation using solar energy.

Accelerating Sulfur Redox Kinetics by Electronic Modulation and Drifting Effects of Pre-Lithiation Electrocatalysts.

Efficient catalyst design is crucial for addressing the sluggish multi-step sulfur redox reaction (SRR) in lithium-sulfur batteries (LiSBs), which are among the promising candidates for the next-generation high-energy-density storage systems. However, the limited understanding of the underlying catalytic kinetic mechanisms and the lack of precise control over catalyst structures pose challenges in designing highly efficient catalysts, which hinder the LiSBs' practical application. Here, drawing inspiration from the theoretical calculations, the concept of precisely controlled pre-lithiation SRR electrocatalysts is proposed. The dual roles of channel and surface lithium in pre-lithiated 1T'-MoS2 are revealed, referred to as the "electronic modulation effect" and "drifting effect", respectively, both of which contribute to accelerating the SRR kinetics. As a result, the thus-designed 1T'-Lix MoS2 /CS cathode obtained by epitaxial growth of pre-lithiated 1T'-MoS2 on cubic Co9 S8 exhibits impressive performance with a high initial specific capacity of 1049.8 mAh g-1 , excellent rate-capability, and remarkable long-term cycling stability with a decay rate of only 0.019% per cycle over 1000 cycles at 3 C. This work highlights the importance of precise control in pre-lithiation parameters and the synergistic effects of channel and surface lithium, providing new valuable insights into the design and optimization of SRR electrocatalysts for high-performance LiSBs.

Revamping Triboelectric Output by Deep Trap Construction.

High output performance is critical for building triboelectric nanogenerators (TENGs) for future multifunctional applications. Unfortunately, the high triboelectric charge dissipation rate has a significant negative impact on its electrical output performance. Herein, a new tribolayer is designed through introducing self-assembled molecules with large energy gaps on commercial PET fibric to form carrier deep traps, which improve charge retention while decreasing dissipation rates. The deep trap density of the PET increases by two orders of magnitude, resulting in an 86% reduction in the rate of charge dissipation and a significant increase in the charge density that can be accumulated on tribolayer during physical contact. The key explanation is that increasing the density of deep traps improves the dielectric's ability to store charges, making it more difficult for the triboelectric charges trapped by the tribolayer to escape from the deep traps, lowering the rate of charge dissipation. This TENG has a 1300% increase in output power density as a result of altering the deep trap density, demonstrating a significant improvement. This work describes a simple yet efficient method for building TENGs with ultra-high electrical output and promotes their practical implementation in the sphere of the Internet of Things.

General Entropy Approach Toward Ultratough Sustainable Plastics.

Entropy is a universal concept across the physics of mixtures. While the role of entropy in other multicomponent materials has been appreciated, its effects in polymers and plastics have not. In this work, it is demonstrated that the seemingly small mixing entropy contributes to the miscibility and performance of polymer alloys. Experimental and modeling studies on over 30 polymer pairs reveal a strong correlation between entropy, morphology, and mechanical properties, while elucidating the mechanism behind: in polymer blends with weak interactions, entropy leads to homogeneously dispersed nanosized domains stabilized by highly entangled chains. This unique microstructure promotes uniform plastic deformation at the interface, thus improving the toughness of conventional brittle polymers by 1-2 orders of magnitude without sacrificing other properties, analogous to high-entropy metallic alloys. The proposed strategy also applies to ternary polymer systems and copolymers, offering a new pathway toward the development of sustainable polymers.

Frameworked Electrolytes: A Pathway Towards Solid Future of Batteries.

All-solid-state batteries (ASSBs) represent a highly promising next-generation energy storage technology owing to their inherently high safety, device reliability, and potential for achieving high energy density in the post-ara of lithium-ion batteries, and therefore extensive searches are ongoing for ideal solid-state electrolytes (SSEs). Though promising, there is still a huge barrier that limits the large-scale applications of ASSBs, where there are a couple of bottleneck technical issues. In this perspective, a novel category of electrolytes known as frameworked electrolytes (FEs) are examined, where the solid frameworks are intentionally designed to contain 3D ionic channels at sub-nano scales, rendering them macroscopically solid. The distinctive structural design of FEs gives rise to not only high ionic conductivity but also desirable interfaces with electrode solids. This is achieved through the presence of sub-nano channels within the framework, which exhibit significantly different ion diffusion behavior due to the confinement effect. This perspective offers a compelling insight into the potential of FEs in the pursuit of ASSBs, where FEs offer an exciting opportunity to overcome the limitations of traditional solid-state electrolytes and propel the development of ASSBs as the holy grail of energy storage technology.

First principles-based design of lightweight high entropy alloys.

Recently, the design of lightweight high entropy alloys (HEAs) with a mass density lower than 5 g/cm3 has attracted much research interest in structural materials. We applied a first principles-based high-throughput method to design lightweight HEAs in single solid-solution phase. Three lightweight quinary HEA families were studied: AlBeMgTiLi, AlBeMgTiSi and AlBeMgTiCu. By comprehensively exploring their entire compositional spaces, we identified the most promising compositions according to the following design criteria: the highest stability, lowest mass density, largest elastic modulus and specific stiffness, along with highest Pugh's ratio. We found that HEAs with the topmost compositions exhibit a negative formation energy, a low density and high specific Young's modulus, but a low Pugh's ratio. Importantly, we show that the most stable composition, Al0.31Be0.15Mg0.14Ti0.05Si0.35 is energetically more stable than its metallic compounds and it significantly outperforms the current lightweight engineering alloys such as the 7075 Al alloy. These results suggest that the designed lightweight HEAs can be energetically more stable, lighter, and stiffer but slightly less ductile compared to existing Al alloys. Similar conclusions can be also drawn for the AlBeMgTiLi and AlBeMgTiCu. Our design methodology and findings serve as a valuable tool and guidance for the experimental development of lightweight HEAs.

Key role of eg* band broadening in nickel-based oxyhydroxides on coupled oxygen evolution mechanism.

A coupled oxygen evolution mechanism (COM) during oxygen evolution reaction (OER) has been reported in nickel oxyhydroxides (NiOOH)-based materials by realizing eg* band (3d electron states with eg symmetry) broadening and light irradiation. However, the link between the eg* band broadening extent and COM-based OER activities remains unclear. Here, Ni1-xFexOOH (x = 0, 0.05, 0,2) are prepared to investigate the underlying mechanism governing COM-based activities. It is revealed that in low potential region, realizing stronger eg* band broadening could facilitate the *OH deprotonation. Meanwhile, in high potential region where the photon utilization is the rate-determining step, a stronger eg* band broadening would widen the non-overlapping region between dz2 and a1g* orbitals, thereby enhancing photon utilization efficiency. Consequently, a stronger eg* band broadening could effectuate more efficient OER activities. Moreover, we demonstrate the universality of this concept by extending it to reconstruction-derived X-NiOOH (X = NiS2, NiSe2, Ni4P5) with varying extent of eg* band broadening. Such an understanding of the COM would provide valuable guidance for the future development of highly efficient OER electrocatalysts.

Designing Efficient Single-Atom Alloy Catalysts for Selective C═O Hydrogenation: A First-Principles, Active Learning and Microkinetic Study.

Selective hydrogenation of α,ß-unsaturated aldehydes into unsaturated alcohols is a process in high demand in organic synthesis, pharmaceuticals, and food production. This process requires the precise hydrogenation of C═O bonds, a challenge that requires a tailored catalyst. Single-atom alloys (SAAs), where individual atoms of one metal are distributed in a host metal matrix, offer a potential solution to this challenge. Nevertheless, identifying the appropriate SAA capable of targeted adsorption and the efficient activation of C═O bonds remains a substantial hurdle. In this work, we synergistically combine density functional theory (DFT) calculations, active learning, and microkinetic simulations to design SAAs for the efficient and selective hydrogenation of α,ß-unsaturated aldehydes. We first comprehensively assessed the potential of 66 SAAs across 264 surfaces (including (100), (110), (111), and (320) crystal planes), to gauge their potential in activating C═C and C═O bonds. Our assessment unveiled the excellent selectivity of the Ti1Au SAA in activating C═O bonds. Moreover, our detailed DFT calculations further demonstrated the high catalytic activity of Ti1Au(320) and Ti1Au(111) surfaces with a low activation energy barrier of only 0.60 eV. Subsequently, we conducted microkinetic simulations on the selective hydrogenation process of crotonaldehyde, by selecting Ti1Au (320) and (111) surfaces as the catalysts and demonstrated that they exhibited a remarkable selectivity and nearly 100% conversion toward crotyl alcohol in the temperature range from 373 to 553 K. The present study not only reveals novel SAAs for targeted hydrogenation of α,ß-unsaturated aldehydes but also establishes a promising path toward efficient design of selective hydrogenation catalysts more broadly.

Microstructure-driven mechanical and electromechanical phenomena in additively manufactured nanocrystalline zinc oxide.

Advances in nanoscale additive manufacturing (AM) offer great opportunities to expand nanotechnologies; however, the size effects in these printed remain largely unexplored. Using bothin situnanomechanical and electrical experiments and molecular dynamics (MD) simulations, this study investigates additively manufactured nano-architected nanocrystalline ZnO (nc-ZnO) with ∼7 nm grains and dimensions spanning 0.25-4µm. These nano-scale ceramics are fabricated through printing and subsequent burning of metal ion-containing hydrogels to produce oxide structures. Electromechanical behavior is shown to result from random ordering in the microstructure and can be modeled through a statistical treatment. A size effect in the failure behavior of AM nc-ZnO is also observed and characterized by the changes in deformation behavior and suppression of brittle failure. MD simulations provide insights to the role of grain boundaries and grain boundary plasticity on both electromechanical behavior and failure mechanisms in nc-ZnO. The frameworks developed in this paper extend to other AM nanocrystalline materials and provide quantification of microstructurally-drive limitations to precision in materials property design.

Antibody dependent cell-mediated cytotoxicity selection pressure induces diverse mechanisms of resistance.

Targeted monoclonal antibody therapy has emerged as a powerful therapeutic strategy for cancer. However, only a minority of patients have durable responses and the development of resistance remains a major clinical obstacle. Antibody-dependent cell-mediated cytotoxicity (ADCC) represents a crucial therapeutic mechanism of action; however, few studies have explored ADCC resistance. Using multiple in vitro models of ADCC selection pressure, we have uncovered both shared and distinct resistance mechanisms. Persistent ADCC selection pressure yielded ADCC-resistant cells that are characterized by a loss of NK cell conjugation and this shared resistance phenotype is associated with cell-line dependent modulation of cell surface proteins that contribute to immune synapse formation and NK cell function. We employed single-cell RNA sequencing and proteomic screens to interrogate molecular mechanisms of resistance. We demonstrate that ADCC resistance involves upregulation of interferon/STAT1 and DNA damage response signaling as well as activation of the immunoproteasome. Here, we identify pathways that modulate ADCC sensitivity and report strategies to enhance ADCC-mediated elimination of cancer cells. ADCC resistance could not be reversed with combinatorial treatment approaches. Hence, our findings indicate that tumor cells utilize multiple strategies to inhibit NK cell mediated-ADCC. Future research and development of NK cell-based immunotherapies must incorporate plans to address or potentially prevent the induction of resistance.

Achieving highly reversible zinc metal anode via surface termination chemistry.

An oxidation layer on a Zn surface is considered to play a negative role in hindering the practical applications of aqueous zinc ion batteries (AZBs). Herein, we demonstrate the importance of Zn-surface termination on the overall electrochemical behavior of AZBs by revisiting the well-known bottleneck issues. Experimental characterizations in conjugation with theoretical calculations reveal that the formation of a dense Zn4(OH)6SO4·xH2O (ZSH) layer from the well-designed surface-oxide termination layer improves the interface stability of the Zn anode and reduces the dehydration energy of Zn(H2O)62+, thereby accelerating the interface transport kinetics of Zn2+. Moreover, instead of directly diffusing over the ZSH layer, a new "edge dehydration-along edge transfer" mechanism of Zn2+ is discovered. Owing to the presence of a Zn anode with a ZnO-derived ZSH layer, an ultrahigh stability of over 1200 h with a high cumulative-plated capacity of 6.24mAh cm-2 is achieved with a symmetrical cell. Furthermore, high cycling stability (over 1000 cycles) and Coulombic efficiency (99.07%) are obtained in the entire AZBs with a MnO2 cathode. An understanding of the oxygen surface termination mechanism is beneficial to Zn-anode protection and is a timely forward step toward the long-pursued practical application of AZBs.

Ideal plasticity and shape memory of nanolamellar high-entropy alloys.

Understanding the relationship among elemental compositions, nanolamellar microstructures, and mechanical properties enables the rational design of high-entropy alloys (HEAs). Here, we construct nanolamellar AlxCoCuFeNi HEAs with alternating high- and low-Al concentration layers and explore their mechanical properties using a combination of molecular dynamic simulation and density functional theory calculation. Our results show that the HEAs with nanolamellar structures exhibit ideal plastic behavior during uniaxial tensile loading, a feature not observed in homogeneous HEAs. This remarkable ideal plasticity is attributed to the unique deformation mechanisms of phase transformation coupled with dislocation nucleation and propagation in the high-Al concentration layers and the confinement and slip-blocking effect of the low-Al concentration layers. Unexpectedly, this ideal plasticity is fully reversible upon unloading, leading to a remarkable shape memory effect. Our work highlights the importance of nanolamellar structures in controlling the mechanical and functional properties of HEAs and presents a fascinating route for the design of HEAs for both functional and structural applications.

Quasi-Copper-Mers Enable High-Performance Catalysis for CO2 Reduction.

As the atmospheric carbon dioxide (CO2 ) level keeps hitting the new record, humanity is facing an ever-daunting challenge to efficiently mitigate CO2 from the atmosphere. Though electrochemical CO2 reduction presents a promising pathway to convert CO2 to valuable fuels and chemicals, the general lack of suitable electrocatalysts with high activity and selectivity severely constrains this approach. Herein, a novel class of electrocatalysts is investigated, the quasi-copper-mers, in which the CuN4 rather than Cu atom itself serve as the basic building block. The respective quasi-copper-monomers, -dimers, and -trimers hosted in a graphene-like substrate are first synthesized and then performed both experimental characterization and density functional theory (DFT) calculations to examine their atomic structures, evaluate their electrocatalytical performance and understand their underlying mechanisms. The experimental results show that the quasi-copper-trimers not only outperform the quasi-copper-dimer and quasi-copper-monomer when catalyzing CO2 to CO, it also shows a superior selectivity against the competing hydrogen evolution reaction (HER). The DFT calculations not only support the experimental observations, but also reveal the volcano curve and the physical origin for the qausi-copper-trimer superiority. The present work thus presents a new strategy in the design of high-performance electrocatalysts with high activity and selectivity.

Integration of Single-Atom Catalyst with Z-Scheme Heterojunction for Cascade Charge Transfer Enabling Highly Efficient Piezo-Photocatalysis.

Piezo-assisted photocatalysis (namely, piezo-photocatalysis), which utilizes mechanical energy to modulate spatial and energy distribution of photogenerated charge carriers, presents a promising strategy for molecule activation and reactive oxygen species (ROS) generation toward applications such as environmental remediation. However, similarly to photocatalysis, piezo-photocatalysis also suffers from inferior charge separation and utilization efficiency. Herein, a Z-scheme heterojunction composed of single Ag atoms-anchored polymeric carbon nitride (Ag-PCN) and SnO2- x is developed for efficient charge carrier transfer/separation both within the catalyst and between the catalyst and surface oxygen molecules (O2 ). As revealed by charge dynamics analysis and theoretical simulations, the synergy between the single Ag atoms and the Z-scheme heterojunction initiates a cascade electron transfer from SnO2- x to Ag-PCN and then to O2 adsorbed on Ag. With ultrasound irradiation, the polarization field generated within the piezoelectric hybrid further accelerates charge transfer and regulates the O2 activation pathway. As a result, the Ag-PCN/SnO2- x catalyst efficiently activates O2 into ·O2 - , ·OH, and H2 O2 under co-excitation of visible light and ultrasound, which are consequently utilized to trigger aerobic degradation of refractory antibiotic pollutants. This work provides a promising strategy to maneuver charge transfer dynamics for efficient piezo-photocatalysis by integrating single-atom catalysts (SACs) with Z-scheme heterojunction.